HyperOS Global Port

#HyperOS #MIUI #Port #Android14 #Global
HyperOS Global Port
OS1.0.8.0.ULCEUXM (Android 14)
Updated: 17.05.2024

Notes: 
• Based on Xiaomi 12
• Flash according to instructions below (fastboot)
• Auto brightness is not working
• In case of refresh rate drops - set 1 Hz refresh rate in Display settings

Installation:
• Flash Global HyperOS for 12X 1.0.1.0 (A13) or a firmware from 1.0.1.0 before flashing port.
• Extract archive with PeaZIP, WinRar or 7-Zip
• Type these commands in CMD: 
  1. fastboot flash boot boot.img
  2. fastboot flash dtbo dtbo.img
  3. fastboot flash vendor_boot vendor_boot.img
  4. fastboot --disable-verity --disable-verification flash vbmeta_ab vbmeta.img (Drag vbmeta.img inside cmd prompt, then press enter)
  5. fastboot flash super super.1.0.8.0.ULCEUXM-CUPID-PORT.img
  6. fastboot reboot recovery
• Format data with yes

By: Stefi
Follow: @Xiaomi12XGlobalOfficial
Join: @Xiaomi12XGlobalUpdates